Skip to content

Change-log

Version 3.0.1

Added

  • LFO: Added new Unipolar / Bipolar switch
  • S&H: Added new Unipolar / Bipolar switch
  • S&H: Added new Slew parameter

Improvements

  • Updated all module panel designs for better consistency
  • General UI design improvements
  • Updated Max framework

Fixes

  • ROUTING MATRIX: The H shortcut now properly enables / disables the Arrow button
  • INPUT: Input channel selector now works correctly

Version 3.0

Added

  • Snapshots: save and recall the state of all 12 slots (up to 8 snapshots per Layout).
  • Quick-route: a new way of quickly routing signals between modules.
  • Status Board: new visual indicators for MIDI, OSC and the Gate Bus.
  • New Utility Rack scope: smoother signals to help you better visualize signals generated by the different modules
  • New MIDI Note module: generate MIDI notes using the different module available in CV Toolkit
  • Matrix CC Outputs: generate MIDI CC messages based on the 8 outputs of the Routing Matrix
  • Native support for Apple Sillicon

Improvements

  • Improved Theme support: themes can now load faster and work more reliably across the different modules and panels in CV Toolkit 3
  • Layouts engine has been re-written to improve performance and realibility.
  • New Utility Rack combined oscilloscope: new 4-channel design with faster refresh rate
  • Gate Sequencer module: view tabs now correctly follow the selected theme
  • Notes module can now output pitch data to the Pitch Bus while in Quantizer mode.
  • Smart Tuner in the Notes module now works in Quantizer mode.
  • Envelope module: extended length (10ms up to 20s), added new Random and Reset buttons, improved reliability.
  • Mophing VCO's Morph parameter now works continuously
  • Improved Euclidean Sequencer shifting

Version 2.8

⠀

New Features:

Enhancements / Bug Fixes / Minor Changes:

  • Fixed a bug that would cause the Windows version to crash when used with certain audio interfaces.
  • Minor bug fixes and improvements.

Version 2.7

⠀

New Features:

  • New Buffer module.
  • Added a new Compatibility Mode for the Expert Sleepers ES-5 module.
  • Added support for HZ/V calibration in the Notes module.
  • Added a new Phase parameter to the LFO module.
  • Added a new Output Range parameter to the Sequencer module.
  • New Layouts import / export features: You can now easily import or export one or all Layouts as JSON files. This is feature useful for backing up and sharing your Layouts with other CV Toolkit users.
  • 3 new Themes: Frozen, Flashy and Cinema.

Enhancements / Bug Fixes / Minor Changes:

  • The Notes Module can now output a steady gate signal to a selected Gate Bus channel during calibration.
  • New Settings save / recall script: We're completely re-written the way CV Toolkit stores it's settings and the new method should fix issues related to saving / restoring these settings.
  • Fixed bug that'd prevent Gate Bus Channel #4 from working correctly.
  • Updated Ableton Link support.
  • Improved default Layout.

Version 2.6.1

⠀

Enhancements / Bug Fixes / Minor Changes:

  • Fixed a bug that would double incoming notes from MIDI Channels 2-4 in the Monophonic Voicing Modes.
  • Fixed a bug that would prevent CV Toolkit from correctly recalling Pitch Bus assingments (specially channels 2-4).
  • Adjusted the length of the triggers generated by the Comparator module (now 20ms).
  • Improved the internal pack downloader script to download the appropriate files according to the CV Toolkit version.

Version 2.6

⠀

New Features:

  • New ADSR Envelope module.
  • New Input module.
  • Added Ableton Link Support.
  • Added Sync Compensation for all Sync methods.
  • New Keyboard Representation added to the Quantizer.
  • Modules with internal clocks (such as the Sequencer and the S&H) can now output their internal clocks to the Gate Bus.
  • Added new Auto Slide to the Sequencer module. The Auto Slide adjusts the slide time automatically based on the difference between two steps (slide time is longer for greater differences). The maximum slide time can be set from 5ms to 150ms.
  • The SlotLoader code was entirely re-writter to be more flexible, powerful and to allow for certain features to be implemented in future modules.

Enhancements / Bug Fixes / Minor Changes:

  • New MIDI Clock Sync method (vastly more reliable and stable than the previous version).
  • Major improvements to the sync / timing between all the virtual modules / slots.
  • Slot Loader internal code was re-written to be more realiable and stable.
  • Enhacements to the AD Envelope curve function.
  • Adjusted the length of the triggers generated by the Clock Generator, Reset, and Euclidean Sequencer (Deluxe Pack) modules (now 20ms).
  • The Pitch Bus now runs at audio-rate.
  • Fixed a bug in the VBrazil LFO that would cause the S&H to trigger incorrectly.
  • Sequencermodule can now create sequences as short as 2 steps.
  • Notes module now clips incoming signals to the quantizer to +/- 1.
  • The Pulse-Width parameter in the Clock Generator now gets disabled when the module is set to Trigger mode.
  • The Snap feature in the ScanGraph module is now available as a button on the module's panel.
  • Fixed a bug in the Gate Sequencer (Beats Pack) module that would cause the sequencer to start at step #2 when clocked via the Gate Bus.
  • Fixed a bug that would prevent the VBrazil pack to show as installed in the Download Pack window.
  • Fixed a bug in the Sequencer module that would cause it to occasionally skip certain steps.
  • Fixed a problem with the SMUX support that would cause the outputs to be shuffled.

Version 2.5

⠀

New Features:

  • New RESET module for resetting analog sequencers according to CV Toolkit's transport.
  • New extensive OSC Support.
  • The Layouts functionality was revised and it now works faster and smoothly. It now stores all parameters for all slots, as well as voice mode, routings (via the Routing Matrix), custom titles, and quantizer settings.
  • CV Toolkit now displays a Loading overlay while loading Layouts in order to give the user visual feedback for the loading.
  • The 12 squares representing the slots inside the Layouts Preview box can now be clicked in order to reset the corresponding slot back to the stored values in the currently loaded Layout.
  • Support for Themes. New themes included: Tech, Forest, Red Velvet, GrayScale, NightLife (specially designed for people with deuteranopia), Anachrome (specially designed for people with Tritanopia), and High Contrast.
  • Custom Titles - You can now rename modules by double clicking on the module’s title and entering a new custom name.

Enhancements / Bug Fixes / Minor Changes:

  • The Scan parameters in the ScanGraph module now works smoothly.
  • Fixed a bug that would prevent Routing Matrix Guidelines (Visual Feedback) to work correctly while controlling the Routing Matrix's Output Layer.
  • Because of the changes in the Layouts functionality, the Sequencer module is now limited to 3 internal sequences.
  • VCA (Deluxe Pack): Bias and Gain range changed to 0-100%
  • Fixed a bug that would prevent the user from selecting the correct channel in the MIDI Output Channel drop-down menu.

Version 2.2

⠀

  • The Notes module can now save and restore calibration files. When an existing calibration file is loaded, the Notes module will automatically validate it and display the results via the new Smart Tuner.
  • The Notes module now remembers the Input Channel.
  • Custom scales can now be saved and deleted from the Quantizer / MIDI Settings tab.
  • Re-designed CV to MIDI CC Converters to add individual On / Off toggles and initial burst (for MIDI mapping).
  • New Layouts design.
  • The Voice Mode setting is now stored within Layouts.
  • New toggle button for the routing matrix visual-feedback mode.
  • The MIDI Pitch Bend range can now be adjusted from the Quantizer / MIDI Settings tab.
  • Added triple divisions and multiplications to the Clock Generator and PWM Clock modules.
  • Added ratio mode to the Morphing VCO module.
  • Added “Velocity” toggle button to AD Envelope.
  • Fixed a bug that would cause the Gate Sequencer module to drift out of time when using triplet clocks.
  • The GateBus Display leds on the Utility Rack are now numbered.

Version 2.1.1

⠀

  • New Logo
  • Updated graphics (compatible with high-definition monitors).
  • Miscellaneous minor bug fixes.

Version 2.1

⠀

  • Bug fixes for the Expert Sleepers ESX-4CV and ESX-8CV support.
  • New option to change the MIDI output channel (for the CV to MIDI CC converters).
  • Miscellaneous minor bug fixes.